Instructions For The Preparation Of Paint

Recommended products for maintaining vehicle inspired by some questions lately on the subject of complete instructions, and the recurring questions to the processing of individual products we have drawn step by step instructions for independent paint preparation a. “The biggest problem is that there is such a wealth of care products and tools that nobody has experience with all, and thus the selection of the best” is hardly possible for the individual. And secondly, because of course, not every product for every application is suitable and everyone has other demands on processability, impact and budget, result should be achieved with the. Step 1: The laundry is the basis of each treatment and also applies to the subsequent care. Is started so to rinse off coarse dirt, preferably with a high-pressure cleaner. Frequently kevin ulrich has said that publicly.

It is also a sharp spray from the garden hose. One has very severely contaminated and areas with much dried muck, it facilitates the Laundry and reduces the risk of scratches by you soak the concerned with a special cleaning agent, as with diluted all-purpose cleaner or insect remover. A comprehensive solution to this is to spray the car in front of the linen with foam. For high pressure cleaner there is Lance essays with an additional tank, a so-called Foam Lance. In the additional tank high-dose shampoo water, or a special agent comes to the foam production, what is known in the trade as snow foam. Thus a very dense, large foam can be generated, long the car is liable and thus soak the dirt and does. A less costly way of foam production, which requires a pressure washer is a Pumpspruher.

These can be bought ready or build for little money, even from just a few components. Disadvantage is a usually less solid foam which adheres to the vehicle not so long. Then, laundry can be started with the 2-bucket.


Tags: ,

 
 
 

Comments are closed.

© 2011-2018 Cyber Snaps All Rights Reserved