Mosaics

Currently, bathrooms and toilets are becoming an important place in the house. When you begin to finish the bathroom, you will need to answer a few questions. You should choose a bathtub, sink, toilet, furniture, rack for towels and other kinds of accessories. There are many design options and finish a bathroom that is sometimes difficult to understand where to be begin. In my opinion, should first determine what the atmosphere in the bathroom (Traditional, modern, etc.) you would like to see. And only then start looking for bathroom fixtures, accessories and stuff that will complement your selection.

Consider the cost and quality accessories, as they should be used for a long time. Walls, ceiling and floor is very important. Therefore, we must choose the optimal color and decoration materials. The most important rule – finishing materials in the bathroom must be moisture resistant. Ceramic tile. Ceramic tile wall and floor meet. Tiles are produced in different colors, with all kinds of texture. Perhaps this is a good decoration material for the bathroom.

She has considerable resistance to adverse environments. Temperature drops only slightly affect the performance parameters of ceramic tiles. Ceramic wall tile floor thin and therefore less robust. Outdoor Ceramic tiles can be slippery. It can be as rough and smooth surfaces, but not glossy. Natural stone, artificial stone, mosaic. As flooring, bathroom might using natural or artificial stone. Most frequently used marble and granite. These materials are very strong, but at the same time, expensive and heavy. It is worth noting that the art of mosaics rather plastic finishing material. Mirror. Mirrors are used in ceilings of bathrooms and walls. They expand the place and make the room more lit. It is very necessary, as is usually the bathrooms are not huge in size. Mirrors can be used in combination with other materials such as ceramic tile. Aluminium (suspended ceilings). The ceiling in the bathroom easy to make suspended. Suspended ceiling is very simple. The ceiling is made of aluminum slats. Those, in turn, fit into the grooves, which are attached to the ceiling of the bathroom. Reiki can find a variety of colors, wide and narrow, they can simply make the desired length simply by cutting off the unnecessary parts. It is important that the moisture suspended ceilings. In them it is easy to insert the light fixtures and vents. It is true they should be used in conventional bathrooms (square, rectangular).

Laying Paving Slabs

Laying paving slabs consists of several steps: Determine the location where the sidewalk will be located surface and slope, designed to drain water (transverse, longitudinal or longitudinal and transverse). Turnkey basis. As a rule, it is a gravel-sand (sand – 4 cm gravel – 14 cm) or crushed stone pad. Difficult conditions include a cement-sand base (120-150 kg of cement / 1 cubic meters. Sand, the height of the cement-sand mixture – 3-4 cm). To to the paved area served as long as possible each layer of pillows carefully leveled and compacted by vibration or hand tamping.

The last layer of the water and carefully poured over 2-3 hours (in solar weather) you can begin to equalize. After this, proceed to the paving. For a start determined by the composition of elements of the composition and shape of the tiles. After selecting the desired image on the bevel tile and pull a cord on it laid the first row. Tiled strictly away from you.

Laid treatment so that each plate tightly related to the previous, the seam between them should be in the range of 2-5 mm. If the tile is uneven, a It is enclosed sand trowel and leveling happens again. At the conclusion of all major works from the top tiles sprinkled with cement-sand mixture (1:8), all seams are carefully . Mixture in the gaps with a hose with Spray thoroughly moistened to harden it. Notes: It is impossible to lay the cover on rainy days. You can not sprinkle the tile filings. If your site is different, "difficult soil" should be taken into note that any bias can distort coverage. To avoid this, do the following: We cover the ground 80 mm layer of concrete from the top – 40 mm layer of cement-sand mixture semi, after her vibrating top tiled. There is also laying on a solution. Apply it with intensive use of the coating. The basis for such a placement is a reinforced concrete screed, it is applied 25 mm layer solution, it is laid tiles that once sprinkled the top with sand.

© 2011-2019 Cyber Snaps All Rights Reserved