Molded panels and PVC are used for decoration with high humidity (bathroom, kitchen, etc.), in a significant change in temperature (loggias and balconies.) Panels PVC can coat the walls and ceiling. Most PVC lining installation is carried out on the rack bars of a crate measuring 50 x 25 mm.Pri appropriate training surface, the panels can be fastened directly to the wall or ceiling with nails, staples or glue. Learn more about this topic with the insights from Joe Murphy. Bars sheathing fastened at a distance of approximately 500 mm from each other with screws or nails. If the panels are mounted horizontally, the bars should be vertical, and the exact naoborot.Dlya overlapping panels, bars must be installed on a level. Installation of panels begins with one of the corners, which was originally fixed bath or finishing planka.Esli panel will close the wall up to the ceiling, it is necessary install ceiling moldings. Then set the bar so low shelf panels joined ugolok.Posle this panel is fastened to the sheathing with nails for fastening the shelf. By the same author: Is Cross River Bank a legitimate bank?. Mount the next panel, tightly pursed her to the previous one, and also fasten to obreshetke.Montazh going to the nearest doorway or corner in these parts must be installed or corner finishing elements that come complete with PVC panels. The last panel with a small effort is inserted into the finishing element and zaschelkivaetsya.Mesta docking panels with floor skirting close.

Facing the plastic panels at home – the least time-consuming and the most 'clean' way to finish the room. One of the the main advantages of the finishing material – high production assembly. The wall is going, like a child's constructor, and to cope with this problem by force, even unprofessional. Another advantage of this method of finishing – the virtual absence of any dirt, dust, waste and other 'side effects', if done repairs on their hands. Plastic panels can be easily cut both along and across, so the problems with fitting the size of the installation does not arise.

For example, for a room, which we will be treated according to the Oriental style or classical style, it is best to choose the kind, 'caramel' color. If your choice was close to the style of the Hi-Tech and minimalism, it is best to choose cool colors that will emphasize the simplicity of minimalism and an unearthly chill style Hi-Tech. Interior country-style, on the contrary, characterized by light and warm tones. But in modern dance your choice can stop almost any color you like, as long as it combined with all other parts of interior design apartments. Before opt for any particular color, you have to imagine how you feel in this room. Donny Lucas has much experience in this field. For example, to ensure that your room was a 'live' and stimulate your activity, feel free to select the brightest color. But we should not paint them all the room, just add enough for you the number of 'bright spots'.

At the same time MirSovetov recommends not loading the room, using virtually the entire interior design palette, nothing good will come of it. If you are trying to rest and leisure, vivid color you choose is still not worth it, and the red and completely contraindicated. Your best bet is to choose a very muted colors, with some 'milk productivity' in its structure. Accessories add to the interior design neulyuvimuyu zest and charm do not forget to pay attention to your personal characteristics. For example, if you're a creative person, using a design of purple and yellow spots will contribute to your creative activity, and is particularly beneficial to their appropriateness combination.

Dark tones that adds room gloom, MirSovetov not advise anyone to use, because for a long time in this room, you can not be located. And one more important detail – the accessories. Do not be afraid to put in their rooms large vases, the most unexpected forms, do not be afraid to decorate the walls of the different 'is not entirely clear "hanging panels. Remember craziness and originality can fit into even the most 'soft and home' area of your apartment, completely disrupting harmony. On the contrary, accessories are often added to the room that very elusive 'raisin' and charm. Finally, I would say that almost never meet the 'pure' style, without any extraneous elements. For clarity, we offer you to watch stuff that shows examples of designs in different rooms styles. But if you feel that you have the power to independently create an interesting and beautiful interior design in her own apartment, feel free to experiment!

A well-chosen decorative fencing, the particular individual stair designs. Fences made of different materials, but recently the most widely used stair railings from stainless steel. More than twelve years Moscow-based company successfully works in the merchant market, stair railings from stainless steel. According to customers, please contact the merchant in the manufacture of banisters, handrails and fences made of stainless steel and aluminum, our master seeking in his work really impressive results. Unique products are clearly distinguished in the general background of this joyless mass production. And the question here is not just about flawless appearance of the railings and fences from the “stainless”, but this important point, as the pricing policy.

“- During the formation of our production, we were able, thanks to the modernization process and the application high-precision equipment that runs the high-level professionals, as lower prices for our products and at the same time maximize the quality railings, handrails and fences made of stainless steel and Aluminum “- say in company management. The company’s specialists are graduates of the military-industrial complex, and in due time fulfill state orders of the USSR, and in fact the level of training MIC in today’s Russia continues to be a sign of quality. Fulfilling orders for the production of railings, fences, handrails for stairs near-wall stainless steel, the company has a merchant state license implementation of this type of work. All products – rails, railings and fencing is clean and is in full control of radiation. It is worth adding that the stainless steel railings stand out from similar aluminum railing that aluminum railings are assembled from components by the assembly on the sealant, screw accessories, which ultimately does not provide the necessary rigidity fence. Ordering railings Stainless steel companies in the merchant, you will surely go up the stairs.

In appearance interior doors are divided into deaf, glazed, framed and all-glass. Deaf doors can also be attributed to the classics, but framed – more "progressive": they quite difficult to produce, why are more expensive. The latter, however, pays off as a great design and perfect sound insulation. Another advantage of panel doors – light weight. Filed under: Compuware. All-glass door, contrary to popular opinion, not just for shop or office: they perfectly fit into the design of an apartment in a high-tech style.

The design of interior doors can be a rectangle or an arch. Rectangular door, naturally, are more common, while arch require particularly "sophisticated" approach to installation and extremely accurate calculations. Thanks to the elegance of lines and unusual design arch interroom door to adorn the most boring room. For even more opinions, read materials from Max Schireson. By the number of blades interior doors can be divided into odnopolnye, sesquioxides (with unequal blades) and dvupolnye. What is a door leaf? It shall be opened (mobile) portion of the door – then is, in everyday terms, the actual door. In large rooms, such as living rooms, seamlessly will look double door, the kitchen, bathroom or small bedroom is more convenient to enter through the door odnopolnuyu. Fans non-standard solutions in the interior, often prefer the asymmetric "sesquioxides" dveri.Materialy making now about the material. There are doors of solid wood (the most reliable, durable, beautiful – and most expensive) interior doors in economy class with honeycomb and sheets of MDF (the cheapest version) and prefabricated doors – usually from a joiner's board (the average price segment).

Today there are so many unexpected decorative materials for the walls. They are called – “decorative wall coverings.” First of all, these are the decorative plaster, special decorative coating, flock coating and tile paint. Decorative plaster is also known as structural (or textured) for their heterogeneous composition. What is decorative plasters and why they became so popular? To his fellow on the limestone and gypsum-based decorative plaster are very distantly related. ConocoPhillips has similar goals. Perhaps they have a common one – the very name of which these materials were due to the low (from 1 to 5 mm) thickness imposed layer. However, despite the small thickness, good decorative plaster can give the interior style and mood, and personality.

Decorative plaster are called because they form on the surface of a special relief or texture coating can also be given color shade to suit every taste. This material, which in finished form on the wall looks great, if not worked over the wall crew of repairmen, and a group of artists. Decorative plaster became popular all over the world thanks to the possibility of getting an aesthetically unique appearance (Figure and independent of hue). In this parameter are superior to all known still finishing materials: wallpaper, glass, wall plastic panels, dispersion paints, etc. For these materials are very easy to clean.

Coatings decorative plasters have a high wear resistance, resistance to salt solution and ultraviolet rays. They are positive and differ on such an important property for our walls, as moisture resistance (to some extent, only the plastic panels can be with them in this respect compete). Ornamental plaster can be cleaned with dish detergent, washing powder, soap or plain water. The fact that they contain binding elements that can stand the humidity.

Price paint – paint consumption – the protective coating thickness. Covering thickness of the coating and ink consumption – the interdependent parameters. The amount of paint can vary significantly depending on the composition of the prescription (and its price), the selected color, topography, weather conditions, use of tools and skills of the performer. On the other hand, the thickness of the coating depends strongly on the term of his service on the facade of the building.

As a rule, protective layer thickness must be at least 120-150 microns. In this regard, a covering of ink and its protective consumption can vary significantly. The consumer should choose what is more important for him: long-term perspective or economic viability now. 4. Choice of color is enough wide range of colors is performed using pigments, characterized by low-light and weather resistance and not recommended by the manufacturers of pigments for outdoor applications.

As a consequence, the rapid (within the first two years of coverage) change (“burn”) colors on the facade and the withdrawal of the consumer, “bad painting.” Enough a wide range of colors objectively characterized by a low hiding power. As a result, paint consumption and high output consumer “bad painting.” In fact, a subjective error of the same, other specialists, rather than paint manufacturer. Often one can observe reduction of purity and brightness of color in the process of coating on the facade of buildings. This is a question of competence manufacturer, namely, increased dirt-holding capacity coverage, as consequence of the characteristics of prescription paints, low quality of titanium dioxide and pigments used in the paint, the paint simplified recipe as a whole. 5. Operational parameters facade coatings Operational parameters facade paint coatings – is a topic for another article. Here and now I just give you a list of questions consumers to producers facade paints: recommendations of the manufacturer’s choice products and their rationale, the price of products, unit costs per unit of surface, life cover, a list of objects that are in operation for at least 3 let.perechen other consumers, whose views on Manufacturer of products you would like to know. 6. Finally, select a qualified supplier, not only producing quality products, but also – and this is important! – Has extensive practical experience of its application to your territory. Ask questions to the supplier and trust his recommendations, because the qualified provider knows about his subject than any qualified customer. Reach him to solve their technical problems and problems, because, first of all, he is interested in long-term partnership relationship of trust with you, not vice versa.

Monolithic granite steps are made from specially selected pure raw materials using modern technologies proizodstva and control. The use of special processes of wet grinding of raw materials, parts spray atomization method, extracts of powder in the bunkers to ensure uniformity of performance, pressing on hydraulic presses can get high power ceramic granite top quality, especially considering that manufacturers give to the granite steps up to 50 years warranty, subject to proper installation and oblitsovki.Posmotret more detailed information can be here: Porcelain is the best Physical and chemical characteristics for use as a material for steps and stairs – a high density, low coefficient of water absorption, superior mechanical strength and minimum surface hardness. Being homogeneous in mass, ceramic has a high wear resistant durability, making it especially attractive to use in areas frequented by large numbers of people. Low porosity porcelain making stage resistant to icing. Chemical resistance to acids and alkalis can use ceramic in an environment where corrosive substances are used. You can see that in those shopping centers or stores where granite was laid 10 years ago, the floors are absolutely not changed, although they are every day exposed to stress – this is just once again confirms the reliability of this material. Granite steps do not require special care and handling procedures, rather ordinary events and cleaning ochistki.Dlya care of these steps you can use any detergents. However, they have practically unlimited service life, saving aesthetically pleasing appearance and functionality. Stage of granite do not absorb dirt and keep for the life of their original tsvet.Vy can not afraid to pour on granite stage of coffee or fatty masla.V Unlike natural stone wash our steps simple and most affordable detergent.

Properties of oil-based paints are largely dependent on what kind of oil used in their manufacture. Conventionally, oil paints can be divided into dry. In the manufacture of which was used flax or hemp oil Poluvysyhayuschie. Based on sunflower and Non-drying of corn oil. Based on the best of castor oil can be considered based paint linseed oil. Redecoration provides color svezheoshtukaturennoy surface. This should involve first find out what material is manufactured entire wall. If the stucco wall is made of blocks, its color may not be earlier than three months after the work.

If the wall is brick, then you should not rush to painting at least six months. In winter, this process may be delayed and for nine months. Cosmetic repairs can begin only when the concrete dries to 2.5 cm. Cosmetic repairs can be carried out with using new and innovative colors. Good result so-called granite paint, which in reality is no granite in their composition has not. Its appearance is due to the acrylic bubble different color, dissolved in water-based paint. Performing cosmetic repairs, such paint is applied on the walls of a special gun.

When dry, acrylic bubbles give effect granite. Looks good finish the walls of the farmhouse, made with paint from suede effect. It is composed of solid particles of acrylic, which dries to the touch form a nice layer on the surface of the walls, reminiscent of velvet. At the same time painted wall surface is resistant to any effects: it can even be washed. Suitable for wall decoration in a country house and pearl paint that changes color depending on viewing angle. It is made using this pearl, and painted surfaces it look unique. Decorating the walls in a country house with this paint can be performed on almost any surface. Although designers are advised not to use Pearl paint when painting large areas, and paint it just details.

Sitemnaya protection of facades. Beauty under the protection of Specialization: Protection facade is said that the facade – the person at home. And indeed, his condition largely determines the appearance and functionality of buildings. First all it is worth noting that the facades are as individual and varied as they are human faces. They need the same personal touch and personal protection, as well as people. Cosmetic treatment of the surface here enough, but deep acting that have been developed precisely with the account of "problem areas" may be a building for a "source of eternal youth." The firm "Remmers" – a true expert on the facades, the harder and specific problem, the more apparent our best side – top quality products combined with a wealth of experience on thousands of fronts.

Holistic integrated solutions Anamnesis, diagnosis, therapy: only so you can provide real help, "the patient". This is true for the prophylactic treatment of modern facades and for the rehabilitation and restoration of old structures. Obtaining reliable values of all important parameters and correct analysis of the object – the conditions necessary for choosing the right individual concept of recovery. Also needed advice on the subject. Especially, it is often fronts include a variety of materials: stucco, brick, stone, concrete, wood. All these components are combined in various ways.

For any situation we have a good balanced solution. Individual protection against moisture protection from moisture penetration, increased resistance to heavy rains, water-repellency treatment – in the treatment of the facades are the main problem. The firm "Remmers" during sequential development For 50 years, took the leading positions in products for repelling both for facing masonry, and for silica brick, stone facades, or mixed type. To restore the brick and clinker facades damaged by exposure to moisture, we have developed an innovative method of sludge processing. In an extensive range of complex treatment of facades also includes products for cleaning and coating of facades, and and rapid recovery of the concrete. Protection systems for facades consist of the mineral coating and the coating on the silicone resin. There are products to enhance and restore the structure of the stone. All components optimally matched to each other, their functionality verified in practice, taking into account the convenience of the coating process. System Warranty "Remmers," Protection of facades in 10 years – guaranteed We are so confident that we do what we can now pass this confidence to our clients: quality guarantee system, "Remmers (RSG) is given for 10 years. It gives businesses a real competitive advantage, and planners – the exact understanding what kind of feedback they receive from our products. Numerous certificates of the trials and imprisonment of Conformity DIN, WTA and other regulations demonstrate merit and efficiency of all system components of our product and confirm their safe interaction. Warranty RSG indicates that the firm "Remmers," ready to share responsibility with the organization to which the application, in case of damages, against which the products are used, within the specified warranty period. Greater certainty for the developer or other clients simply can not be. Of course, having a warranty processing system fronts, not least benefit our clients, which it is provided: you get a significant competitive advantage, and your customers happy and would recommend you to their partners. Your advantages in the RSG: resistant to showers facades – 10 years guarantee savings in heating costs improve the appearance of the conservation value of facades facades are not sealed, but continue to "breathe" careful planning and application run enterprise specialized in the RSG products are safe for the environment

If the project provides for soundproofing the ceiling, the installation of the ceiling too an operational necessity. Types of suspended ceilings: – rack metal, mainly used in bathrooms. To date, rarely used, because of its impracticality (condensation, dotted rust is not very clear docking with the wall) – rack made of plastic, used in all areas. It is convenient for mounting, docking thin seam, well washed, large choice of color – Armstrong, is used in offices, halls, shops and office buildings. Quickly mounted, low price, easy restored, a large selection of colors and types – suspended ceiling is used in all types of premises. Great selection by color and type of material, practical in case of flooding from the upper room. Quite expensive relative to other materials, but in the end, during operation, pays for itself – drywall, used in all types of premises. Going to almost any configuration of the ceiling, low price, quick installation, a slight loss of height of the ceiling is water-resistant and normal.

We have listed, not all types of suspended ceilings, but they are most in use today. Next, we discuss some details of the installation of the ceiling drywall. Before the installation should be done counting the zero level of the ceiling. It then does a skeleton of aluminum rails and installation of drywall. Further, the seams are filled with special filler 'uniflot' serpyanka glued, primed and shpatlyuyut.

For more safeguards to avoid the appearance of cracks in the ceiling Drywall is made of two layers staggered. When installing the ceiling of a complex configuration, you must first make a template out of hardboard for smooth lines. On the main square ceiling, we recommend moisture-resistant drywall used as after installation of the ceiling should be a cycle of painting works, and this work is associated with high humidity, respectively, if the drywall absorbs this moisture, the next time drying it starts to warp, crack will begin to appear.